Manual

Chapter 4: Managing User Accounts
60
Editing a User Account
After you create a user account, it is displayed in the User Accounts
section at the top of the Cluster > User Management page.
To edit an existing user account, perform the following procedure:
1. From the main menu, select Cluster > User Management.
The User Management page is shown in Figure 21 on page 58.
2. In the User Accounts section, click the checkbox next to the user name
so that the box is checked, as shown in Figure 22.
Figure 22. User Accounts Section
A user account must be enabled for the user to log on as a client and
use the access point.
You can enable or disable any user account. With this feature, you can
maintain a set of user accounts and authorize or prevent users from
accessing the network without having to remove or re-create accounts.
This can come in handy in situations where users have an occasional
need to access the network. For example, contractors who do work for
your company on an intermittent but regular basis might need network
access for 3 months at a time, then be off for 3 months, and back on
for another assignment. You can enable and disable these user
accounts as needed, and control access as appropriate.
Enabling a User
Account
To enable a user account, perform the following procedure:
1. From the main menu, select Cluster > User Management.
The User Management page is shown in Figure 21 on page 58.