Manual

AT-WA7400 Management Software User’s Guide
75
Configuring
Advanced
Settings
(Customizing and
Scheduling
Channel Plans)
If you use channel management as provided (without updating the
Advanced settings), channels are automatically fine-tuned once every
hour if interference can be reduced by 25 percent or more. Channels are
reassigned even if the network is busy. The appropriate channel sets are
used (b/g for access points using IEEE 802.11b/g and a for access points
using IEEE 802.11a).
These defaults are designed to satisfy most scenarios where you would
need to implement channel management.
You can use the Advanced settings to modify the interference reduction
potential that triggers channel reassignment, change the schedule for
automatic updates, and reconfigure the channel set used for assignments.
To configure the advanced settings, perform the following procedure:
1. From the main menu, select Cluster > Channel Management.
The Channel Management page is displayed, as shown in Figure 27
on page 72.
2. Click Advanced to show the advanced settings.
The advanced settings are shown at the bottom of
3. Configure the following settings as necessary: