Manual

87
Chapter 8
Configuring Ethernet (Wired) Settings
Ethernet (wired) settings describe the configuration of your Ethernet local
area network (LAN).
Note
The Ethernet settings, including guest access, are not shared across
the cluster. You must configure these settings on the web pages for
each access point. To get to the web pages for an access point that
is a member of the current cluster, click on its IP Address link on the
Cluster > Access Points page of the current access point. For more
information about which settings are shared by the cluster and which
are not, see “Which Settings are Shared as Part of the Cluster
Configuration and Which Are Not?” on page 45.
This chapter contains the following sections:
 “Setting the DNS Name” on page 88
 “Enabling or Disabling Guest Access” on page 90
 “Enabling or Disabling Spanning Tree” on page 92
 “Configuring the Internal Interface Ethernet Settings” on page 93
 “Configuring the Guest Interface Settings” on page 96