Manual

Chapter 8: Configuring Ethernet (Wired) Settings
92
Enabling or Disabling Spanning Tree
The AT-WA7400 Management Software allows you to enable or disable
spanning tree through both the wired and wireless interfaces.
To enable or disable spanning tree, perform the following procedure:
1. From the main menu, select Advanced > Ethernet (Wired) Settings.
The Ethernet (Wired) Settings page is shown in Figure 30 on page 88.
2. For the Spanning Tree Protocol setting, choose one of the following:
 Click Enabled to enable spanning tree.
 Click Disabled to disable spanning tree.