Manual

Chapter 9: Configuring the Wireless Settings
98
Configuring 802.11d Regulatory Domain Support
You can enable or disable IEEE 802.11d regulatory domain support to
broadcast the access point country code information.
To configure the IEEE 802.11d regulatory domain support, perform the
following procedure:
1. From the main menu, select Advanced > Wireless Settings.
The Wireless Settings page is shown in Figure 31.
Figure 31. Wireless Settings Page
2. Enable or disable the regulatory domain support setting:
Enabling support for IEEE 802.11d on the access point causes the
access point to broadcast which country it is operating in as a part of
its beacons:
 To enable 802.11d regulatory domain support click Enabled.
 To disable 802.11d regulatory domain support click Disabled.