Product Catalogue

22
Switches
Layer 3 Stackable | Gigabit
Features of the AT-8948
1RU form factor
Front to back cooling for optimum rack/cabinet airflow
Extended operating temperature range up to 50°C
(122°F)
Internal dual hot-swappable AC or DC load-sharing power
supplies
Four Gigabit SFP uplink ports
Wirespeed Layer 3 IPv4 and IPv6 routing
37.6Gbps switch fabric yielding 13.1Mpps throughput
Up to 256K IPv4 route tab
le entries
Advanced routing protocols OSPFv2, BGP-4, IS-IS, RIP and
RIPv2, DVMRP, PIM-SM, PIM-DM
Supports full 4096 VLANs with VLAN double tagging
Private VLANs
Full environmental monitoring, with SNMP traps
Wirespeed traffic classification and ACLs
Policy-based per-flow QoS
Two rate three colour bandwidth metering
Min/max bandwidth limit resolution down to 1kbps
Eight egress/priority queues per port
Weighted Round Robin (WRR) and Strict Priority (SP)
scheduling
SNMPv3, SNMP MIBs for QoS counters on all ports
VRRP
Equal Cost Multi Path (ECMP) routing in hardware
Multiple Spanning Tree Protocol (MSTP) (IEEE 802.1s)
Management Stacking with Open Standards-based
Interfaces
Port trunking with IEEE 802.3ad LACP
Wirespeed multicasting
SSH for secure management
Statefull Inspection Firewall
IEEE 802.1x including
VLAN assignment and MA
C-based
authentication
RADIUS and
TACACS+
Encryption card (AT-AR061) option for hardware
accelerated IPSec and 3DES encryption
Compact flash slot on the front panel
SFP (Small Form Pluggable) modules
AT-SPTX
, 10/100/1000T Copper SFP, 100m
AT-SPSX, Multi-mode fibre, GbE SFP, 850nm
AT-SPLX10, Single-mode fibre, GbE SFP, 10km, 1310nm
AT-SPLX40, Single-mode fibre, GbE SFP, 40km, 1310nm
AT-SPLX40/1550, Single-mode fibre, GbE SFP, 40km,
1550nm
AT-SPZX80, Single-mode fibre, GbE SFP, 80km, 1550nm
AT-SPZX80/xxxx, Single-mode fibre, CWDM, GbE
SFP, 80km
xxxx = CWDM Wavelengths:
1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610
AT-8948 IPV6 Accelerator card
AT-ACC01
HW IPv6 high-speed
AT-8948 Port Accelerator Card (PAC)
AT-AR061
Encryption DES, 3DES and
HMAC + compression high-
performance card
AlliedWare™
The AT-8948 ships with Basic Layer 3 software. Full
Layer 3, Advanced Layer 3 and Security pack option
available. Please see technical specification
details and ordering p/n on page 90.