User's Manual

AT-TQ4400e Outdoor Wireless Access Point Installation Guide
45
Installing the Access Point on a Pole
The AT-TQ4400e access point can be mounted on a vertical pole or
horizontal pole as shown in Figure 18.
Figure 18. Pole Installation of the Access Point
What to Prepare
for Pole
Installation
You need the following items to install the access point on a pole:
 AT-TQ4400e Access Point
 Mounting base
 Four screws for the mounting base
 Pole-mounting bracket
 Four screws for the pole-mounting bracket
 O-ring clamp
 Phillips-head screwdriver
 Flat-head screwdriver
Note
Phillip-head and flat-head screwdrivers are not included in the
shipping box.
Installing the
Access Point on a
Pole
To install the access point on a pole, perform the following procedure:
1. Review “Guidelines” on page 41.
2. Attach the mounting base to the access point with the screws using a
Phillips-head screwdriver. See Figure 15 on page 43.
Draft 4 on November 9, 2017