Installation Guide

Chapter 1: Product Description
20
Features
Hardware features include:
 One 2.4GHz radio
 One 5GHz radio
 4x4 MU-MIMO 2.4GHz Internal antennas
 4x4 MU-MIMO 5GHz Internal antennas
 Transmission beamforming
 One 10/100Mbps/1/2.5/5Gbps Ethernet LAN port with RJ-45
connector
 IEEE 802.3at PoE+ Class 4 powered device
 One Reset button for rebooting the unit or restoring the default
settings
 One On/Off button for the AC/DC power adapter connector
 LEDs for the 2.4GHz and 5GHz radios, Ethernet LAN port, and
power
 Ceiling, wall, or table installation
 Kensington lock port
 One Console RJ-45 port for factory use only
Software features include:
 IEEE802.11a/b/g/n/ac/ax
 Multi-channel (cell operation)
 Channel Blankets (single-channel operation)
 Multi-channel and Channel Blanket hybrid operation
 Orthogonal Frequency Division Multiple Access (OFDMA)
 Manual or automatic radio channel selection
 Sixteen virtual access points (VAPs) per radio and thirty-two VAPs
per access point
 Quality of Service (QoS) ingress and egress queues
 Fast roaming (IEEE 802.11v/k/r)
 Control of radio transmission power
 Dynamic frequency selection
 Band steering
 WiFi multimedia (WMM) for prioritizing traffic
 Client filtering by MAC addresses
Review Draft - August 12, 2020