User guide

1-8 AR100 Series Internet Router User Guide
About this manual
This user guide provides an introduction to the AR100 Series Internet Router,
and detailed step-by-step instructions for installing the AR100 and configuring
the AR100 using the Access Wizard and Configuration Wizard. The user guide
is organised into the following chapters:
Chapter 1, Introduction
introduces the AR100 Series Internet Router and
describes the features and benefits of using the AR100.
Chapter 2, Installing the AR100 Series Internet Router
describes how to install
the AR100 Series Internet Router.
Chapter 3, Getting Connected
describes how to establish communication
between your router and the PC you will use to configure it.
Chapter 4, About web access to the AR100
describes how to access the router
using your web browser.
Chapter 5, Configuring your router for the first time
describes the
Configuration Wizard that will lead you through configuring your AR100
for the first time.
Chapter 6, Changing your Configuration
describes the web-based
Management Wizard that you will use to make subsequent changes to
your configuration.
Chapter 8, Accessing router utilities
describes the router maintenance and
troubleshooting utilities available from the web-based management
Wizard.
Chapter 9, Troubleshooting
gives hints and techniques for troubleshooting
installation and configuration problems.
Chapter 10, Safety and Statutory Information
contains important safety
information for your protection.
If you want to find out more about how different Internet protocols work, or
how to configure the AR100’s advanced networking features using the
command line interface, refer to the
AR100 Series Internet Router Reference
Manual
on the
Installer and Documentation CD-ROM
.
Technical support
For online support for your AR100 Series Internet Router, see our online
support page at
http://www.alliedtelesyn.co.nz/support/ar100
. If you require
further assistance, contact your authorised Allied Telesyn distributor or
reseller.