Specifications

Ethernet Administration

You may enter a new name, up to 20 characters in length, or press RETURN to

keep the existing symbolic name. To delete an existing name, enter one or

more space characters (blanks) and then press RETURN.

Ethernet Parameters

The AT-4016 as well as the AT-TS95TR, offer the choice of store-and-forward

(the default) or cut-through switching strategies. In store-and-forward, the

AT-4016 stores the entire packet before it is forwarded.

Error packets which do not have a valid Ethernet length will be discarded

using store-and-forward but not with cut-through. Due to this software

implementation, there is a minimal latency difference between cut-through

and store-and-forward. The preferred method is store-and-forward.

Choose the System Administration submenu again and enter the letter E

for Ethernet parameters to access the following submenu:

NOTE

All changes to Ethernet parameters require a system reset to be activated.

The Ethernet parameters screen shows the current choices for

forwarding and for LED modes of operation. At the bottom you see a list of

menu options. Each currently conﬁgured choice is highlighted with an

arrowhead (“>”).

Enter the letter

S or the letters CU if you wish to change the forwarding

mode. Enter the letter T or the letters CO if you wish to change the LED

mode.