AT-B15/SX AT-B15/LX AT-B17 Expansion Modules For the AT-8324SX Fast Ethernet Switch Quick Install Guide PN 613-50113-00 Rev A
Copyright 2000 Allied Telesyn International, Corp. 960 Stewart Drive Suite B, Sunnyvale CA 94086 USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp. Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesyn International, Corp.
Electrical Safety and Emission Statement Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Viktig: Tillegg A inneholder oversatt sikkerhetsinformasjon for installering av dette utstyret. Når du ser !, åpner du til Tillegg A for å finne den oversatte sikkerhetsinformasjonen på ønsket språk. Importante: O Anexo A contém advertências de segurança traduzidas para instalar este equipamento. Quando vir o símbolo !, leia a advertência de segurança traduzida no seu idioma no Anexo A. Importante: El Apéndice A contiene mensajes de seguridad traducidos para la instalación de este equipo.
Table of Contents Electrical Safety and Emission Statement ..............................................iii Table of Contents ........................................................................................... v Welcome to Allied Telesyn ......................................................................... vii Where to Find Web-based Guides.................................................................... vii Document Conventions...............................................................
Welcome to Allied Telesyn This guide contains instructions on how to install an AT-B15/SX, AT-B15/LX, or AT-B17 expansion module in an AT-8324SX Fast Ethernet Switch. Where to Find Web-based Guides The Allied Telesyn web site at www.alliedtelesyn.com provides you with an easy way to access the most recent documentation and technical information for all of our products. All web-based documents relating to this product and other Allied Telesyn products can be downloaded from the web site in pdf format.
Contacting Allied Telesyn There are several ways to contact Allied Telesyn technical support: online, telephone, fax and e-mail. Online Support You can request technical support online by filling out the Tech-Assistant Form at www.alliedtelesyn.com/support.htm.
AT-B15 and AT-B17 Quick Install Guide Returning Products Products for return or repair must first be assigned a Return Materials Authorization (RMA) number. A product sent to Allied Telesyn without a RMA number will be returned to the sender at the sender’s expense.
For Sales or Corporate Information Allied Telesyn International, Corp. 19800 North Creek Parkway, Suite 200 Bothell, WA 98011 Tel: 1 (425) 487-8880 Fax: 1 (425) 489-9191 Allied Telesyn International, Corp.
Overview The AT-B15/SX, AT-B15/LX, and AT-B17/SM are optional expansion modules for the AT-8324SX Fast Ethernet Switch. These expansion modules can be used to extend your network to remote sites, build a Fast Ethernet or Gigabit Ethernet backbone, or connect additional nodes to the network, such as highspeed servers. Table 1 lists the basic specifications of the modules.
Figure 1 through Figure 3 illustrate the expansion modules. Figure 1 AT-B15/SX Expansion Module Figure 2 AT-B15/LX Expansion Module Figure 3 AT-B17 Expansion Module Installing the Expansion Module The following sections contain the instructions on how to install an expansion module in the switch. Verifying the Package Contents Check to be sure that your module package contains the following items. If any of the items are missing or damaged, contact your Allied Telesyn representative.
AT-B15 and AT-B17 Quick Install Guide Reviewing Safety Guidelines Please review the following safety guidelines before you begin to install the expansion module in the switch. Warning Class 1 laser product. ! 4 Warning Do not stare into the laser beam. ! 5 Warning Electric Shock Hazard: To prevent electric shock, do not remove the cover. There are no user-serviceable parts inside. The unit contains hazardous voltages and should only be opened by a trained and qualified technician.
Reviewing Connectivity Guidelines The AT-B15/SX has one 1000BASE-SX fiber optic port with an SC connector. This module operates at 1Gbps and supports auto-negotiation for duplex mode (half- or full-duplex) and flow control. Refer to Table 2 for the cabling specifications for this module. Table 2 Cabling Specifications for the AT-B15/SX Expansion Module Cable Fiber Bandwidth Minimum to Maximum Cable Length 62.
AT-B15 and AT-B17 Quick Install Guide Handling the Module Caution The expansion module can easily be damaged by electrostatic discharge. To prevent electrostatic damage, observe the following guidelines: " Wear an anti-static wristband connected to a suitable earth ground whenever handling the module. " Do not remove the module from its packaging until you are ready to install it. " Do not touch any of the module’s pins, connectors or components. " Hold the module only by its edges or front panel.
Figure 4 Removing a Faceplate Note Keep the original faceplate for future use. If you should remove the module, replace the faceplate to prevent dust and debris from entering the unit and to maintain proper air flow. Caution Be sure to wear an anti-static wristband while performing the next step. The AT-STACK1 module can be damaged by electrostatic discharge.
AT-B15 and AT-B17 Quick Install Guide 3. Insert the new module into the switch. Holding the new module with the text on the front panel upright, carefully slide the module into the switch slot, ensuring that the edge connector is fully engaged. Once the new module is installed, check to be sure the front panel of the module is flush against the switch. Figure 5 Installing the Expansion Module 4. Using a flathead screwdriver, secure the new module to the switch by tightening the attached screws. 5.
LEDs The front panel of the switch has several LEDs that report the status of the port(s) on the expansion module. Table 4 defines the LEDs. Table 4 Expansion Module LEDs LED Condition Status STATUS On A module is installed in the slot. ACT Flashing Traffic is passing through the port. Troubleshooting If you experience any problems with the module, check the following items before contacting Allied Telesyn Technical Support: " Ensure the switch with the module is powered up.
AT-B15 and AT-B17 Quick Install Guide Technical Specifications Table 5 lists the technical specifications for the expansion modules. Table 5 Technical Specifications Ports AT-B15/SX One 1000BASE-SX with SC connector AT-B15/LX One 1000BASE-LX with SC connector AT-B17 Two 100BASE-FX with SC connectors Cable Type AT-B15/SX 50/125 or 62.5/125 micron multimode fiber AT-B15/LX 50/125 or 62.5/125 micron multimode fiber AT-B17 50/125 or 62.
Table 5 Technical Specifications Compliances CE Mark EN55022 (CISPR22) Class A VCCI Class A C-Tick Standards AT-B15/SX IEEE 802.3z, ISO/IEC 8802-3 AT-B15/LX IEEE 802.3z, ISO/IEC 8802-3 AT-B17 IEEE 802.3, IEEE 802.
Appendix A Translated Safety and Emission Information Important: This appendix contains multiple-language translations for the safety statements in this guide. Wichtig: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. Vigtigt: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog. Belangrijk: Deze appendix bevat vertalingen in meerdere talen van de veiligheidsopmerkingen in deze gids.
Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
AT-B15 and AT-B17 Quick Install Guide !9 ELECTRICAL - TYPE CLASS 1 EQUIPMENT THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts. ! 10 PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be easily accessible. ! 11 CAUTION: Air vents must not be blocked and must have free access to the room ambient air for cooling.
! 11 VORSICHT Die Entlüftungsöffnungen dürfen nicht versperrt sein und müssen zum Kühlen freien Zugang zur Raumluft haben. ! 12 BETRIEBSTEMPERATUR: Dieses Produkt wurde für den Betrieb in einer Umgebungstemperatur von nicht mehr als 50° C entworfen. ! 13 ALLE LÄNDER: Installation muß örtlichen und nationalen elektrischen Vorschriften entsprechen. Standarder: Dette produkt tilfredsstiller de følgende standarder.
AT-B15 and AT-B17 Quick Install Guide ! 13 ALLE LANDE: Installation af produktet skal ske i overensstemmelse med lokal og national lovgivning for elektriske installationer. Eisen: Dit product voldoet aan de volgende eisen. !1 RFI Emissie !2 WAARSCHUWING: Binnenshuis kan dit product radiostoring veroorzaken, in welk geval de gebruiker verplicht kan worden om gepaste maatregelen te nemen.
Normes: ce produit est conforme aux normes de suivantes: !1 Emission d’interférences radioélectriques EN55022 Classe A EN60555-2 (1995) Classe A EN60555-3 !2 MISE EN GARDE : dans un environnement domestique, ce produit peut provoquer des interférences radioélectriques. Auquel cas, l’utilisateur devra prendre les mesures adéquates. !3 Immunité IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.
AT-B15 and AT-B17 Quick Install Guide Standardit: Tämä tuote on seuraavien standardien mukainen. !1 Radioaaltojen häirintä !2 VAROITUS: Kotiolosuhteissa tämä laite voi aiheuttaa radioaaltojen häiröitä, missä tapauksessa laitteen käyttäjän on mahdollisesti ryhdyttävä tarpeellisiin toimenpiteisiin. !3 Kestävyys EN55022 Luokka A EN60555-2 (1995) Luokka A EN60555-3 IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.
Standard: Questo prodotto è conforme ai seguenti standard. !1 Emissione RFI (interferenza di radiofrequenza) EN55022 Classe A EN60555-2 (1995) Classe A EN60555-3 !2 AVVERTENZA: in ambiente domestico questo prodotto potrebbe causare radio interferenza. In questo caso potrebbe richiedersi all’utente di prendere gli adeguati provvedimenti. !3 Immunità IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.
AT-B15 and AT-B17 Quick Install Guide Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer. !1 RFI stråling !2 ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. !3 Immunitet EN55022 Klasse A EN60555-2 (1995) Klasse A EN60555-3 IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.
Padrões: Este produto atende aos seguintes padrões. !1 Emissão de interferência de radiofrequênciaEN55022 Classe A EN60555-2 (1995) Classe A EN60555-3 !2 AVISO: Num ambiente doméstico este produto pode causar interferência na radiorrecepção e, neste caso, pode ser necessário que o utente tome as medidas adequadas. !3 Imunidade IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.
AT-B15 and AT-B17 Quick Install Guide Estándares: Este producto cumple con los siguientes estándares. !1 Emisión RFI !2 ADVERTENCIA: en un entorno doméstico, este producto puede causar radiointerferencias, en cuyo caso, puede requerirse del usuario que tome las medidas que sean convenientes al respecto. !3 Inmunidad EN55022 Clase A EN60555-2 (1995) Clase A EN60555-3 IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.
Standarder: Denna produkt uppfyller följande standarder. !1 Radiostörning !2 VARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vilket kan tvinga användaren till att vidtaga erforderliga åtgärder. !3 Immunitet EN55022 Klass A EN60555-2 (1995) Klass A EN60555-3 IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line); 0.
Appendix B Technical Support Fax Order Name _________________________________________________________________ Company ______________________________________________________________ Address _______________________________________________________________ City______________________ State/Province_______________________________ Zip/Postal Code ________________ Country_______________________________ Phone ______________________________ Fax_______________________________ Incident Summary Model number of Allied
Appendix C AT-B15 and AT-B17 Quick Install Guide Feedback Please tell us what additional information you would like to see discussed in this guide. If there are topics you would like information on that were not covered in this guide, please photocopy this page, answer the questions and fax or mail this form back to Allied Telesyn. The mailing address and fax number are at the bottom of the page. Your comments are valuable when we plan future revisions of this guide.