Manualshelf

Installation guide

ManualsBrandsAllied Telesyn International Corp ManualsComputer equipmentAT-8350GB
71727374757677787980
Installation
76
6. Ensure that the power supply unit is installed straight and level.
7. Connect the AC-power cord to the AT-RPS2004 unit.
Figure 49 Connecting the AC-power to the AT-RPS2004 Unit
8. Connect the other end of the power cord to an AC power source.
9. Connect an 8-pin DIN connector to the RPS receptacle located on the
back panel of the switch, as displayed in Figure 50.
Figure 50 Connecting the RPS connector
RPS receptacle
8-pin DIN connector