User`s guide

AT-S39 User’s Guide

SNMP Management Session

Another way to remotely manage the switch is with an SNMP

management program. A familiarity with Management Information Base

(MIB) objects is necessary for this type of management.

The AT-S39 software supports the following MIBs:

❑ SNMP MIB-II (RFC 1213)

❑ Bridge MIB (RFC 1493)

❑ Interface Group MIB (RFC 1573)

❑ Ethernet MIB (RFC 1643)

❑ Remote Network MIB (RFC 1757)

❑ Allied Telesyn managed switch MIB

You must download the Allied Telesyn managed switch MIB

(atistackinfo.mib and atiswitch.mib) file from the Allied Telesyn web site

and compile the file with your SNMP program. For instructions, refer to

your SNMP management documentation.

Note

SNMP management does not utilize the enhanced stacking feature.

Consequently, you must assign an IP address to each switch to be

managed with an SNMP program.