User`s guide

AT-S39 User’s Guide
333
System Software Default Settings
The following table lists the system software default settings.
Enhanced Stacking Default Setting
The following table lists the enhanced stacking default setting.
SNMP Default Settings
The following table describes the SNMP default settings.
System Software Setting Default
Console Startup Mode Menu
Enhanced Stacking Setting Default
Switch State Slave
SNMP Communities Setting Default
SNMP Status Disabled
Get Community public (Read Only)
Set Community private (Read|Write)
Trap Community public
Trap Receivers 1, 2, 3, 4 0.0.0.0