User`s guide

Section II: Local and Telnet Management

Configuring the Console Startup Mode

You can configure the AT-S39 software to display either the Main Menu

or the command line interface prompt ($) whenever you start a local or

remote management session. The default is the Main Menu.

To change the console startup mode, perform the following procedure:

1. From the Main Menu, type 5 to select System Config Menu.

2. From the System Configuration Menu, type 6 to select Console

Startup Mode.

The following prompt is displayed:

Enter Console Mode (M-Menu, C-CLI):

3. Type M if you want a management session to always start with the

Main Menu, or C if you want it to display the command line interface

prompt. The default is the Main Menu.

A change to the console startup mode takes effect the next time

you start a local or remote management session.