Installation manual

AT-1500 Plug and Play
4
computer is Plug and Play ready. In a non Plug and Play
situation, you may need to ensure that the card is configured to
work in your computer by resolving I/O resource settings.
Network Software and Driver Installation
Most of the network software manufacturers provide an
installation program that allows you to perform the entire
installation by making dialog-box choices. As part of the network
installation, the install script will prompt for the adapter card
driver files. The driver files for the AT-1500 adapter card are
found on the Allied Telesyn CardAssistant diskette, which you
will be called on to insert into a floppy drive.
Drivers for Workstations. Table 1 lists the drivers for use in a PC
workstation.
Table 1: Which Driver to Use in a Workstation
Network Software Card Driver Path\Filename
Windows 95 \WINNT-95\AT1500M.SYS
NetWare for DOS \DOS\AT15ODI.COM
NetWare Requester for OS/2 \OS2\AT1500.OS2
Personal NetWare \DOS\AT15ODI.COM
Windows for Workgroups \WFW31\AT1500.DOS
PC/TCP-compatible TCP/IP \PKTDRV\AT1500.COM