User manual

AT-1720
8
2. At the “
Automatically configure the system? (Y/N)
”
prompt, answer N for no, and the Main Menu will appear.
Do not answer Y here, or you will have to reset your
computer to get back to this point.
3. Select the “
Copy an option diskette
” option, and follow
the procedure to completion.
4. Remove the Allied Telesyn diskette from the floppy drive.
Configuring the adapter card (auto-configure)
1. Verify that all floppy drives are empty if you followed Step
1a on page 7. If you followed Step 1b in the previous step,
place the computer manufacturer’s reference diskette in
drive A:.
2. At your computer’s keyboard, hold down the (control)
and keys, and press the (delete) key. This will
reset your computer. The first screen you see will be the
Configuration Error screen of the configuration installation
step.
3. This time, when asked “
Automatically configure the
system? (Y/N)
” answer Y for yes. A screen message
informs you when the configuration process is completed.
4. After you have completed configuring your system for the
adapter card, verify that your floppy drives are empty, and
re-boot your computer.
Configuring the adapter card (manual configure)
1. Boot your computer as in “Installing option files” Steps 1a
or 1b on page 7.
2. In the Main Menu, select the “
Set Configuration
” menu.
3. In the “
Set Configuration
” menu, select “
Change
Configuration
.”
CTRL
ALT DEL