User manual

Network Adapter Card Drivers

4. Exit the manufacturer’s configuration software.

The word “Slot” in the following step, must be

indented from the left margin under the Link Driver

line by at least one space or one tab.

5. Open the ASCII file NET.CFG with a text editor and verify

that the following lines are there:

Link Driver AT17ODI

Slot

where

corresponds to the computer’s card cage slot

number.

6. The batch file, e. g., AUTOEXEC.BAT, that you use to get on

the network must contain these lines in the following order:

LSL

AT17ODI

IPXODI

NETX

7. Now reboot the computer to load the new configuration,

and look for the driver's log-on message.

Installing NDIS for TCP/IP

AT1700.DOS is the AT-1720 adapter card driver based on the

Network Driver Interface Specification (NDIS) developed by

Microsoft and 3Com. It is used for Microsoft LAN Manager

applications, as well as implementations of Transmission Control

Protocol/Internet Protocol (TCP/IP) such as PC-NFS from Sun

Microsystems.