User manual

AT-1720
2
❑ The CardAssistant diskette which contains:
— Adapter Description Files (ADF) for card
configuration
— CardAssistant software setup and diagnostic test
program
— Network adapter card drivers
— Support files for network software
— Readme files
What Else You Need to Connect to the Network
You must have an IBM PS/2 or compatible computer that meets
the following requirements:
❑ An MCA bus computer
❑ Approximately 32K of available RAM for the driver, depending
on the driver installed
Table 1: Supported Network Media
Card
Model
10BASE-
T
10BASE2 10BASE5 10BASE-FL
AT-1720T Supporte
d
N/A N/A N/A
AT-
1720AT
Supporte
d
Supported
with
transceiver
Supported
with
transceiver
Supported
with
transceiver
AT-
1720BT
Supporte
d
Supported N/A N/A
AT-
1720FT
Supporte
d
N/A N/A Supported