Install guide

OmniConnect MultiModem Quick Install Guide
13
Pressing the Dial-In Setup box allows users to dial in on a specific modem. On
the OmniConnect, any one of the three external modems may be set for Dial-In.
Press the Dial-In Setup box to advance to the Dial-In Setup screen.
Scripting is enabled by clicking the Login Script box and advancing to the next
screen. Pressing the Login Script box allows users to send a script to the ISP; see
“Dial-In Setup.”
Dial-In Setup
The Dial-In Setup screen is used to setup a particular modem for Dial-In. Using
the OmniConnect Dial-In feature, users can call into the OmniConnect and
access resources on the local LAN or browse the Internet using one of the other
modems that are configured for normal (Dial Out) operation.
To use Dial-In, select the check box entitled Enable Dial-In for modem number.
Only one modem (1, 2 or 3) may be enabled for Dial-In at any given time. The
authentication parameters used for the modem that is set for Dial-In use are the
login name, password and Idle Timeout specified in the Modem Setup (see the
previous screen). If the modem is not set for Dial-In, the login name, password
and Idle Timeout are used for outgoing connections to an ISP.