User`s guide

FORMULA 8200 User’s Guide

5-33

PORTSERV Command

Syntax

PORTSERV

PORTSERV/CONFIG/<subcommand>

PORTSERV/SHOW/<subcommand>

Description

The

PORTSERV command applies to ATM functionality only. This

command allows you to conﬁgure and display port service for a

physical port. Table 5-10 describes the parameters in the display.

Refer to the AT-8202 ATM Uplink User’s Guide for more on ATM-

speciﬁc commands. The guide is available in PDF format from Allied

Telesyn’s website at www.alliedtelesyn.com/manuals.htm.

/ >portserv

/PORTSERV >

== PORTSERV MENU ==

[CONFIG] [SHOW]

Table 5-10 PORTSERV Command Parameters

Subcommand Alias Description

CONFIG CREATE cps Create a port service.

MOVE mvps Move a port service from one VLAN to another.

REMOVE rmps Remote a port service.

SHOW PHYPORT vpp Show the physical port conﬁguration.

PORTSERV vps Show the port service conﬁguration.