User`s guide

FORMULA 8200 User’s Guide
B-5
RMON Support
Note
Enable RMON only on ports you want to monitor in this instance.
Once you are done monitoring, turn off or disable RMON activities to
maintain peak switch performance.
Enabling
RMON Objects
The following is an example of enabling the RMON groups Statistics,
History, Alarm and Event groups. This example show the setting of a
Rising Alarm of Absolute Value that gets logged to the
Event Group. The alarm Variable is the object icmpInMsgs.0, with
a threshold of 600 messages. Port 5 of the FORMULA 8200 is used in
this example (ifIndex.5). Use your SNMP management station to
set the objects.
set <IP Address of AT-8200 Switch> etherStatsStatus.5 "createRequest"
set <IP Address of AT-8200 Switch> etherStatsDataSource.5 "ifIndex.5"
set <IP Address of AT-8200 Switch> etherStatsOwner.5 "Owner"
set <IP Address of AT-8200 Switch> etherStatsStatus.5 "valid"
set <IP Address of AT-8200 Switch> historyControlStatus.5 "createRequest"
set <IP Address of AT-8200 Switch> historyControlDataSource.5 "ifIndex.5"
set <IP Address of AT-8200 Switch> historyControlOwner.5 "Owner"
set <IP Address of AT-8200 Switch> historyControlStatus.5 "valid"
set <IP Address of AT-8200 Switch> eventStatus.5 "createRequest"
set <IP Address of AT-8200 Switch> eventDescription.5 "icmpInMsg.0 = 600"
set <IP Address of AT-8200 Switch> eventType.5 "log"
set <IP Address of AT-8200 Switch> eventOwner.5 "Owner"
set <IP Address of AT-8200 Switch> eventStatus.5 "valid"
set <IP Address of AT-8200 Switch> alarmStatus.5 "createRequest"
set <IP Address of AT-8200 Switch> alarmInterval.5 "1"
set <IP Address of AT-8200 Switch> alarmVariable.5 "icmpInMsgs.0"
set <IP Address of AT-8200 Switch> alarmSampleType.5 "absoluteValue"
set <IP Address of AT-8200 Switch> alarmStartupAlarm.5 "risingAlarm"
set <IP Address of AT-8200 Switch> alarmRisingThreshold.5 "600"
set <IP Address of AT-8200 Switch> alarmFallingThreshold.5 "0"
set <IP Address of AT-8200 Switch> alarmRisingEventIndex.5 "5"
set <IP Address of AT-8200 Switch> alarmFallingEventIndex.5 "5"
set <IP Address of AT-8200 Switch> alarmOwner.5 "Owner"
set <IP Address of AT-8200 Switch> alarmStatus.5 "valid"