User`s guide

FORMULA 8200 User’s Guide
C-8
11. Respond to each prompt, beginning with the boot device. Base
your entries on Table C-2.
This takes you back to the [VxWorks Boot]: prompt.
12. Enter
@ to boot the new firmware.
The image software begins loading from flash. The switch
prompts you for system information. These items are optional;
you can change them later.
13. Log in to the switch and use the
/BOOT/IP command to configure
all IP information.
You are done. You may now restore your backed up configurations.
[VxWorks Boot]: c
‘.’=clear field; ‘-’=go to previous field; ^D=quit
boot device:
Table C-2 Parameters for Loading the New Image Software From Flash
System Prompt User Entry
boot device: flash
processor number: 0
host name: Press [Return]
file name: /flash/firmware
inet on Ethernet (e) : Press [Return]
host inet (h) : Press [Return]
gateway inet (g) : Press [Return]
user (u) : Press [Return]
ftp password (pw) (blank = use rsh): Press [Return]
flags (f) : 0x8
target name (tn) : Press [Return]
startup script (s) : Press [Return]
other (o) : Press [Return]
[VxWorks Boot]:@