User`s guide

FORMULA 8200 User’s Guide
C-11
6. Enter c to change the parameters for downloading the image
software:
7. Respond to each prompt, beginning with boot device, basing
your entries on Table C-3.
8. Select Transfer, then Send File.
9. When prompted, browse for the firmware and select
communications protocol Zmodem. Make sure the firmware file is
named firmware.
10. Press the SEND button.
The process takes about 25 minutes.
11. Reset the FORMULA 8200.
When the system starts, the following message appears:
[VxWorks Boot]: c
‘.’=clear field; ‘-’=go to previous field; ^D=quit
boot device:
Table C-3 Parameters for Downloading the Image Software
System Prompt User Entry
boot device: flash
processor number: 0
host name: Press [Return]
file name: /flash/firmware
inet on Ethernet (e) : Press [Return]
host inet (h) : Press [Return]
gateway inet (g) : Press [Return]
user (u) : Press [Return]
ftp password (pw) (blank = use rsh): Press [Return]
flags (f) : 0x4
target name (tn) : Press [Return]
startup script (s) : Press [Return]
other (o) : Press [Return]
Press any key to stop auto-boot...