User`s guide

FORMULA 8200 User’s Guide
C-12
12. Quickly press any key to return to the [VxWorks Boot]
prompt.
13. Enter c to set the boot parameters for loading the new image file.
14. Respond to each prompt, basing your entries on Table C-4.
15. At the [VxWorks Boot]: prompt, enter @ to boot the new
firmware from the switch:
You are done. You may now restore your backed up configurations.
[VxWorks Boot]: c
‘.’=clear field; ‘-’=go to previous field; ^D=quit
boot device:
Table C-4 Parameters for Loading the New Image File From Flash
System Prompt User Entry
boot device: flash
processor number: 0
host name: Press [Return]
file name: /flash/firmware
inet on Ethernet (e) : Press [Return]
host inet (h) : Press [Return]
gateway inet (g) : Press [Return]
user (u) : Press [Return]
ftp password (pw) (blank = use rsh): Press [Return]
flags (f) : 0x8
target name (tn) : Press [Return]
startup script (s) : Press [Return]
other (o) : Press [Return]
[VxWorks Boot]: @