User`s guide

Operating and Managing the FORMULA 8200 Switch
4-16
Displaying Virtual Bridge Information
You can display three types of virtual bridge parameters:
❑ Spanning tree bridge parameters
❑ Spanning tree port parameters
❑ The bridge forwarding table
To display spanning tree bridge parameters:
Use the
VBRIDGE/SHOW/BRIDGE <VLAN#> command.
The following display is an example of what you might see
when you enter the command for VLAN 1:
For more detailed information about this command, refer to the
VBRIDGE command in Chapter 5.
/VBRIDGE/SHOW/BRIDGE 1
Spanning Tree Parameters for VLAN 1
Spanning Tree Status : ON
Priority : 32768 (0x8000)
Bridge ID : 8000-0060e8ffff00
Designated Root : 8000-0060e8ffff00
Cost to Root Bridge : 0
Root Port : None
Hold Time : 1
Topology Changes : 0
Last Topology Change : No Topology Change So Far
Bridge Aging Timer : 300
Parameters System Uses When
Current Parameters Attempting to Become Root:
--------------------------------------------------------
Max Age 20 secs System Max Age 20 secs
Forward Delay 15 secs System Forward Delay15 secs
Hello Time 2 secs System Hello Time 2 secs
Local parameters
Global parameters