User`s guide

FORMULA 8200 User’s Guide
4-17
Displaying Spanning Tree Port Parameters
To display spanning tree port parameters:
Use the
VBRIDGE/SHOW/PORT <VLAN#> command.
The following display is an example of what you might see
when you enter the command for VLAN 1:
For more detailed information about this command, refer to the
VBRIDGE command in Chapter 5.
/VBRIDGE/SHOW/PORT 1
Spanning Tree Port Parameters for VLAN 1
Port
Number
-------
Pri
---
State
--------
Path
Cost
-----
Desig
Cost
-----
Desig
Port
-------
Root
Port
----
Root Bridge ID
Desig Bridge ID
--------------
16 128 FORWDING 10 0 8000-16 None 8000-0060e8ffff00
8000-0060e8ffff00
15 128 FORWDING 10 0 8000-15 None 8000-0060e8ffff00
8000-0060e8ffff00
14 128 FORWDING 10 0 8000-14 None 8000-0060e8ffff00
8000-0060e8ffff00
.
.
.
3 128 FORWDING 10 0 8000-03 None 8000-0060e8ffff00
8000-0060e8ffff00
2 128 FORWDING 10 0 8000-02 None 8000-0060e8ffff00
8000-0060e8ffff00
1 128 FORWDING 10 0 8000-01 None 8000-0060e8ffff00
8000-0060e8ffff00