User`s guide

Operating and Managing the FORMULA 8200 Switch
4-24
Restoring Your
Configurations
After making sure the software upgrade is stable, you may restore
your old configurations using the following procedure.
To restore your configurations;
1. Log in to the switch and
PING the TFTP server to verify
communications:
2. Assign an IP address to the TFTP server:
3. Restore the configuration files by using the
TFTP/DOWNLOAD//
CFG
command. In this command, you need to specify the name
of the file(s) you want to restore:
4. Reboot the switch using the
REBOOT command on the console
prompt.
/ >ping 192.48.127.124
192.48.127.124 is alive
/ >tftp/server
IP address of the tftp server ( ) :192.48.127.124
Save TFTP configuration to flash? (y/n) y
Writing new TFTP configuration to flash...
Updating system/VLAN configuration..
.
/ >tftp/download/cfg
Name of file on switch (system.cur) :
Name of file on tftp server (system.001) :
File “system.001” on server (192.48.12.124) is to be copied to switch as
flash/system.cur”
Are they correct? (y/n) y
Save TFTP configuration to flash? (y/n) y
Writing new TFTP configuration to flash ...Updating system/VLAN configuratio
n
LF = /flash/system.cur, RF = system.001, SRV = 192.48.127.124, op = get
/TFTP/DOWNLOAD>
/ TFTP/DOWNLOAD>top
/ >reboot
Are you sure, you want to reboot ? [y/n]: y