User`s guide

Command Reference
5-20
ETHERNET/CONFIG/FLUSH Example
To clear dynamically learned MAC addresses from the
bridge table:
1. Enter
ETHERNET/CONFIG/FLUSH to display the following menu:
2. Enter one of the following commands:
PORTFLUSH <port #> to clear the bridge table of dynamically
learned MAC addresses on a designated port
ALLPORTFLUSH to clear the bridge table of dynamically
learned MAC addresses on all ports
UPLINKFLUSH to clear the bridge table of dynamically
learned MAC addresses on an uplink port only
To view the table, use the VBRIDGE/SHOW/FWT command
(page 5-50).
Note
The FLUSH command does not work on static addresses. Static
addresses are manually entered and must therefore be manually
deleted. See also Configuring a Virtual Bridge in Chapter 3,
beginning on page 3-11, for the procedure to add static addresses to
the table using the VBRIDGE/CONFIG/FILTER/ADD command.
/ETHERNET/CONFIG/FLUSH
=== FLUSH (ETHERNET CONFIG) MENU ==
PORTFLUSH ALLPORTFLUSH UPLINKFLUSH