Installation guide

AT-S63 Version 2.0.0 Software Release Notes
PN 613-000592 Rev A 4 Allied Telesyn, Inc.

MSTP warning message. The command line interface did not display a warning message
that changing the MSTP force version from MSTP to STP-compatible deletes all multiple
spanning tree instances. The management software now displays a warning message.
(3465)
 SFP speed and duplex mode prompt. The erroneous prompt “10/100/1000Base-T” was
displayed alongside the speed and duplex mode settings on an SFP port if you disabled
Auto-Negotiation and set the speed manually using the Port Configuration menu in the menu
interface. The issue has been resolved. (3481)
 SET MSTP PORT command. The command line interface did not check for extraneous
characters following the AUTO option of the INTPORTCOST and EXTPORTCOST
parameters. The issue has been resolved. (3550)
 Telnet management session. Repeatedly logging in from a Telnet management session and
displaying system files caused the management software to stop saving configuration
changes to the active boot configuration file and displaying the system files. This issue has
been resolved. (3685)
 atiStkSwSysTrapRecv1-4 MIB object. This MIB object, used to display the IP addresses of
the SNMP trap receivers, was nonfunctional. This object is now obsolete. (3260)
 AT-9448Ts/XP and compact flash. File operations (e.g., copy, delete, etc.) to or from a
compact flash card on the AT-9448Ts/XP switch caused the switch management to lockup.
This issue has been resolved.