Installation guide

AT-S63 Version 2.0.0 Software Release Notes
PN 613-000592 Rev A 8 Allied Telesyn, Inc.
Features History
Version 1.3.0 of the AT-S63 and AT-S63 NE management software introduced the following new
features:
 Added the following new features to 802.1x port-based network access control:
— Guest VLANs
— VLAN Assignment and Secure VLAN features for supporting dynamic VLAN assignments
with supplicant accounts.
— MAC address-based authentication as an alternative to 802.1x username and password
authentication.
 Simplified the menu interface for managing the access control entries in the Management
ACL.
Version 1.2.0 introduced the following new features:
 MLD snooping for MLDv1 and MLDv2.
 802.1x port-based network access control has been enhanced to support up to 20
supplicants simultaneously on an authenticator port.
 Quality of Service has been enhanced with the following new actions:
— Set Type of Service (ToS)
— Move Type of Service to 802.1p Priority
— Move 802.1p Priority to Type of Service
— Send to Mirror Port
 The command line interface has been enhanced with new command parameters for
displaying and deleting specific types of MAC addresses from the MAC address table.
Version 1.1.0 introduced the following new features:
 LACP (802.3ad)
 Policy-based QoS (Classifiers, Flow Groups, Traffic Classes, and Policies)
 Flash memory operations
 Access Control Lists (ACLs)
 Syslog support
 Password reset
 Redundant power supply information
 IGMP v3 Snooping
 New web browser interface procedures
Version 1.0.0 supported the following features:
 Auto-Negotiation (IEEE 803.3u-compliant) for speed and duplex mode
 Auto and manual MDI/MDI-X
 Flow control (IEEE 802.3x and 802.3z-compliant)
 Head of line blocking prevention
 Unicast, multicast, and broadcast rate control
 Port mirroring