Specifications

Camera interfaces
Bonito Technical Manual V2.2.1
23
Camera I/O connector pin assignment
(15-pin D-Sub jack)
This connector is intended for supplying power as well as external input/output
signals.
Power supply (pin 1-4)
The camera requires 12 V DC (+5%, -10%) at a continuous maximum of 0.4 A.
We recommend to use respectively both pins for power supply
(1–2 and 3–4).
Figure 11: Camera I/O connector pin assignment
Pin Signal Direction Level Description RS232
9-pin
D-SUB
1
External Power
+12 V DC
(+5%, –10%),
0.35 A (4.2 W),
max. 0.36 A
Power supply
2
3
External GND
5 (GND)
4
5 Reserve
6 Sync Out RS232 Synchronization
signal
7RXD In RS232 3 (TXD)
8 TXD Out RS232 Serial control 2 (RXD)
9 Reserve
10
Trigger input
- Optocoupler
input, 5 ... 12 V,
15 mA max.
External trigger
signal
11 +
12 Exposure output - Optocoupler
output,
open collector,
30 V, 150 mW max.
Active exposure
signal
13 +
14 Reserve
15 Reserve