Specifications

Camera Link interface (O1-O4 or CL1, CL2)
Bonito Technical Manual V2.2.1
28
Each channel delivers ten Camera Link ports labelled A–J. Every port has eight
bits and is assigned to a corresponding sensor tap which outputs specific pixel
columns of the image. Consequently, up to 2 x 10 = 20 simultaneous pixels are
transferred to the frame grabber(s) in parallel per Camera Link clock cycle.
The following illustrations depict the bit and wire assignments at the Camera
Link connectors:
Figure 15: Camera link connector: 10-tap pin assignment (O2/O4 or CL1 connector)