Specifications

Camera Link interface (O1-O4 or CL1, CL2)
Bonito Technical Manual V2.2.1
31
Reserve control input (CC2)
The camera control signals CC2 at the Camera Link connectors O2 and O4 (or
connector CL1) are reserved for future use.
Pixel order
Each frame in single channel mode (S=0, max. 193 full frames per second) is
transmitted from top left to bottom right, line per line. The diagram below
shows how the image is reconstructed from the ten Camera Link taps A – J.
Because every tap directly corresponds to a Camera Link port, the port labels are
reused as tap labels here. Each Camera Link clock cycle transmits one block of
ten pixels. Please note that the number of lines may vary depending on the
value of parameter N.
Figure 17: Pixel order: full frame