Specifications

Camera Link interface (O1-O4 or CL1, CL2)

Bonito Technical Manual V2.2.1

In the high speed dual channel modes (S=1 or S=3, max. 386 full frames per sec-

ond) the image is split up vertically into two equal sized halves. Each half uses

its own Camera Link channel and the pixel data travels over the corresponding

connector pair.

From the host’s point of view the Bonito basically behaves like two cameras with

half of the possible image width. Thus the host computer receives two images at

the same time which are reconstructed in the order shown below. It is the duty

of the system designer to allow for assembly of the two halves if the application

demands it.

Note



This mode is not available for the Bonito CL-400B/C 200fps

cameras.

Figure 18: Pixel order: half frame