Specifications

Parameters and Commands
Bonito Technical Manual V2.2.1
42
e2Image on demand mode (IOD) with exposure timer
The exposure time is controlled by the parameter E.
Each rising edge of an externally applied signal starts one exposure. Use
parameter T to select the signal source.
A rising edge at the corresponding input starts exposure synchronized to the
line after the next. If the rising edge occurs during idle (the camera is not
transmitting an image), the exposure starts with a constant delay of two line
durations.
The next rising edge must not arrive earlier than t
FDmin
+ t
L
after the previous
one.
Bit group Value Function
Table 13: Exposure control modes: Exposure timing mode (bit group: e)
Parameter Value
Trigger Period t
TP
> max (t
FDmin
, E * t
TR
) + t
L
Trigger High Duration t
L
< t
TH
< t
TP
– t
L
Exposure Jitter 0 < t
j
< t
L
Exposure Time t
Exp
= E * t
TR
± t
j
Table 11: M=2 parameters