Specifications

Parameters and Commands
Bonito Technical Manual V2.2.1
50
Version information (V)
The command V displays information about the camera model and firmware
version.
>V
Bonito CMOS High-Speed Camera
Version: CMC.040.xx.yy
>
Save parameters (X)
Use the command X=1 to store all parameter values into the embedded flash
memory. After a re-start they are automatically restored.
Parameter summary (Y)
The command Y shows a summary of all current parameter value settings.
Note

Acquired FPN correction data is not stored and is therefore lost
after switch-off.
See Chapter Fixed Pattern Noise (FPN) Correction (C) on page
36.