Specifications

Introduction
Bonito Technical Manual V2.2.1
8
Manual overview
This manual overview outlines the contents of each chapter of this manual.
•Chapter Contacting Allied Vision Technologies on page 5 lists AVT contact
data (phone numbers and URLs) for both:
– Technical information / ordering
– Commercial information
•Chapter Introduction on page 6 (this chapter) gives you the document his-
tory, a manual overview (short description of each chapter) and conven-
tions used in this manual (styles and symbols).
•Chapter Conformity on page 11 gives you information about conformity of
AVT cameras (CE, FCC, RoHS).
•Chapter Specifications on page 12 lists camera details and measured spec-
tral sensitivity diagrams for each camera type.
continued from last page
V2.2.1 11 May 2012 • Some minor corrections
• Added 80 bit to Camera Link Full+
–Chapter Bonito CL-400B/C, Bonito CL-400B/C 200fps on
page 12
• Added 80 bit to clearly describe the 10-tap configuration of
the Camera Link standard:
–Chapter Camera Link interface (O1-O4 or CL1, CL2) on
page 27
–Chapter Camera link connectors and 10-tap pin assign-
ment on page 27
– Table 18: Output mode setting (S) on page 47
• Added example drawing: see Figure 12: Example conversion
circuit from +/- 6 V RS232 output to 5 V TTL input on page 24
• Added information to use exact multiples oft the current line
duration: see Chapter Timer prescaler value (K) on page 39
• Changed +/-2 t
L
to t
L
in Table 13: Exposure control modes:
Exposure timing mode (bit group: e) on page 41
•Added rising edge description (bit group e, value=2): see
Image on demand mode (IOD) with exposure timer on page
42
• Added more precise description of PIV mode: see PIV mode =
On on page 44.
• Added new Chapter Product variant code (b) on page 52.
• Added new Chapter Command reference on page 56ff.
Version Date Remarks
Table 1: Document history