Specifications

Camera interfaces
Bigeye Technical Manual V2.3.0
32
Camera interfaces
This chapter gives you information on the control functions, inputs and out-
puts, and trigger features.
Control junction
Camera I/O connector pin assignment (15-pin
D-sub connector)
This connector is intended for the power supply as well as for controlling the
camera by the user.
Bigeye P-132B / P-132B Cool / P-132B NIR Cool
www

For accessories such as cables see:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
Pin Signal Direction Level Description
1
External
Power
+12 V DC
Power supply
P-132B NIR Cool: max. 0.85 A
P-132B Cool : max. 2.8 A
P-132 NIR Cool: max. 2.8 A
2
3
External
GND
GND External Ground
4
5--- Reserved
6--- Reserved
7 RXD In RS232 Serial control
8 TXD Out RS232 Serial control
9 Mode input + 12V, 20 mA max. Internal pull-up resistor
10
Trigger input
-
12V, 20 mA max. Optocoupler input
11 +
12
Exposure
output
-
12V, 20 mA max. Optocoupler output
13 +
Table 11: Camera I/O connector pin assignment (Bigeye P-132B/Cool/NIR
Cool)