Specifications

Camera interfaces
Bigeye Technical Manual V2.3.0
39
Frame-sync output (pin 15)
Bigeye P-132 The frame-sync output is only active in continuous operation.
The frame-sync output (active low) supplies approx. 1200 mV at a termination
with 75 .
Bigeye P-629 The frame-sync output becomes active at the beginning of an image output.
The frame-sync-output (active low) supplies approx. 900 mV at a termination
with 75 .
Bigeye P-1100 The frame-sync output is only active in continuous operation.
The frame-sync-output (active low) supplies approx. 1200 mV at a termination
with 75 .
GigE interface
The Bigeye cameras are equipped with a 1000Base-T Ethernet interface. The
data connection between camera and PC can be established via a standard patch
cable of category 5e or better, using a 1000Base-T compatible Ethernet adapter
card.
Figure 16: Frame-sync output (Bigeye P-132)
Figure 17: Frame-sync output (Bigeye P-629)
Figure 18: Line-sync output (Bigeye P-1100)
1 line = 76.19 μs
80 ms
1050 lines
(40 ms / 525 lines)
5 Vss (no-load operation)
1 line = 658.286 μs (390.095 μs for binning mode)
1379.767 ms / 2096 lines
(424.424 ms / 1088 lines)
5 Vss (no-load operation)
1 line = 232.381 μs
634.865 ms / 2732 lines
(317.432 ms / 1366 lines)
5 Vss (no-load operation)