Specifications

Camera interfaces
Bigeye Technical Manual V2.3.0
43
Binning
Each Bigeye camera variant supports one distinct binning configuration (either
1 x 2 or 2 x 2) that can be switched on or off.
This is controlled using the GigE Vision features BinningVertical and
BinningHorizontal from the ImageSizeControl branch of the feature tree.
In the case of 2 x 2 binning the two features are coupled. If either
BinningVertical or BinningHorizontal is changed, the counterpart is
automatically changed as well.
ImageSizeControl
Gain
Use the GigE Vision feature Gain from the feature branch AnalogControls to
change the analog gain setting.
Value 1 selects 0 dB gain and Value 2 switches to +6 dB gain.
Bigeye P-1100 On Image-on-demand mode.
Peltier cooling active.
Exposure control via ExposureTime and DarkTime features
(ExposureMode = Timed) or externally (ExposureMode = Off).
Off Continuous mode with fixed exposure time and frame rate.
Peltier cooling inactive (power saving).
Feature Description
BinningHorizontal Number of horizontal photo-sensitive cell pixels to combine
together. This increases the intensity (or signal-to-noise ratio)
of the pixels and reduces the horizontal resolution (width) of
the image.
BinningVertical Number of vertical photo-sensitive cell pixels to combine
together. This increases the intensity (or signal-to-noise ratio)
of the pixels and reduces the vertical resolution (height) of the
image.
Table 17: Camera standard feature: ImageSizeControl
Camera TriggerMode Description
Table 16: TriggerMode