Technical information

AVT GigE camera attributes
AVT GigE Camera and Driver Attributes V1.3.1
11
This document is a master document for all AVT GigE camera models and is NOT camera specific
AVT GigE camera attributes
Acquisition
Trigger
AcqEnd
AcqEndTriggerEvent – Enum – R/W
If AcqEndTriggerMode = SyncIn1/2/3/4, determines which SyncIn electrical
signal initiates trigger.
AcqEndTriggerMode – Enum – R/W
Determines if end of acquisition initiated by an external hardware trigger.
AcqRec
An AcqStart hardware trigger signal, or the AcquisitionStart command, must
be received before an AcqRec trigger. See AcquisitionMode = Recorder.
AcqRecTriggerEvent – Enum – R/W
If AcqRecTriggerMode = SyncIn1/2/3/4, determines which SyncIn electrical
signal initiates trigger.
EdgeRising [Default] Rising edge trigger
EdgeFalling Falling edge trigger
EdgeAny Rising or falling edge
LevelHigh Active high signal
LevelLow Active low signal
SyncIn1 Trigger at SyncIn1 to be associated with this control
SyncIn2 Trigger at SyncIn2 to be associated with this control
SyncIn3 Trigger at SyncIn3 to be associated with this control
SyncIn4 Trigger at SyncIn4 to be associated with this control
Disabled [Default] No external trigger. Acquisition must be
stopped with the AcquisitionStop API command
EdgeRising [Default] Rising edge trigger
EdgeFalling Falling edge trigger
EdgeAny Rising or falling edge
LevelHigh Active high signal
LevelLow Active low signal