Technical information

AVT GigE camera attributes

AVT GigE Camera and Driver Attributes V1.3.1

This document is a master document for all AVT GigE camera models and is NOT camera specific

ConfigFile

AVT's GigE cameras are capable of storing a number of user-specified configu-

rations within the camera's non-volatile memory. These saved configurations

can be used to define the power-up settings of the camera or to quickly switch

between a number of predefined settings.

ConfigFileIndex – Enum – R/W

Index number corresponds to the configuration set that you are currently work-

ing with.

ConfigFileLoad – Command

Loads settings saved in camera non-volatile memory indicated by ConfigFileIn-

dex to the current camera settings.

ConfigFilePowerUp – Enum – R/W

Saved configuration is loaded when the camera powers up.

ConfigFileSave – Command

Saves the current camera settings to camera non-volatile memory indicated by

ConfigFileIndex. The Factory setting cannot be overwritten.

Controls

ColorTransformationControl

The ColorTransformationControl section describes features related to color

transformations in the AVT GigE color cameras.

Definition. The color transformation is a linear operation taking as input the triplet R

, B

for an RGB color pixel. This triplet is multiplied by a 3x3 matrix.This

color transformation allows changing the coefficients of the 3x3 matrix.

See ColorTransformationValue## attributes.

Note



To save the content of a LUT, use LUTSave or LUTSaveAll

Possible values: Factory, 1, 2, 3, 4, 5 Default: Factory

out

CTV