Technical information

AVT GigE camera attributes
AVT GigE Camera and Driver Attributes V1.3.1
19
This document is a master document for all AVT GigE camera models and is NOT camera specific
DSPSubregionBottom – Uint32 – R/W
Defines the bottom edge of the DSP subregion. Units: Rows from top edge of full
image.
DSPSubregionLeft – Uint32 – R/W
Defines the left edge of the DSP subregion. Units: Columns from left edge of full
image.
DSPSubregionRight – Uint32 – R/W
Defines the right edge of the DSP subregion. Units: Columns from left edge of
full image.
DSPSubregionTop – Uint32 – R/W
Defines the top edge of the DSP subregion. Units: Rows from top edge of full
image.
DefectMaskEnable – Boolean – R/W
Enables or disables masking of defective pixel. Defective pixels are replaced
with averaged values from neighboring pixels.
DefectMask
Some larger format sensors may contain defective columns. Class 1 and Class 0
sensors are available with no defective columns.
Range: [0 – Sensor height] Default: Sensor height
Range: [0 – Sensor width] Default: 0
Range: [0 – Sensor width] Default: Sensor width
Range: [0 – Sensor height] Default: 0
True [Default] Enables defect masking
False Disables defect masking
Note

If BinningX, BinningY, DecimationHorizontal, or Decima-
tionVertical is set greater than 1, DefectMaskEnable is set to
False.
www

For more information on the Defect Mask Loader and defect
masking process, see:
http://www.alliedvision.com/fileadmin/content/documents/
products/cameras/various/appnote/Defect_Masking.pdf
www

See the Modular Concept document, or contact your AVT sales
representative for more information:
http://www.alliedvision.com/fileadmin/content/documents/
products/cameras/various/modular-concept/
Modular_concept_external.pdf