Technical information

AVT GigE camera attributes

AVT GigE Camera and Driver Attributes V1.3.1

This document is a master document for all AVT GigE camera models and is NOT camera specific

DefectMaskColumnEnable – Enum – R/W

Defect masking replaces defective columns with interpolated values based on

neighboring columns. Defective columns are detected and recorded at the fac-

tory.

EdgeFilter – Enum – R/W

Image sharpness/blur. Applied post-bayer interpolation. Only available on

color PixelFormats noted with on-camera interpolation.

EFLensControl

The section describes features related to EF lens control in the GigE cameras

with integrated EF-Mount.

EFLensFStop

EFLensFStopCurrent – Float – R/W

Current F-stop number or aperture of the EF lens.

EFLensFStopDecrease – Command

Decrease F-stop number, i. e., increase lens aperture by the EFLensFStopStep-

Size.

EFLensFStopIncrease – Command

Increase F-stop number, i. e., reduce lens aperture by the EFLensFStopStep-

Size.

Enabled [Default] Enables masking of defective columns

Disabled Disables masking of defective columns

www



For more information on the Loaddefect application and

column defect masking process, see:

http://www.alliedvision.com/fileadmin/content/documents/

products/cameras/various/appnote/

Column_Defect_Masking.pdf

Smooth2 Most blur

Smooth1 Slight blur

Off No blur or sharpness applied

Sharpen1 Slight sharp

Sharpen2 Most sharp

Note



EdgeFilter feature is applicable only to color

models/Manta cameras except Manta type B

camera models.

Note



The features listed under EFLensControl are NOT available

for cameras with Birger EF-Mount option.

Range: [EFLensFStopMin - EFLensFStopMax]Unit: μs