Technical information

AVT GigE camera attributes

AVT GigE Camera and Driver Attributes V1.3.1

This document is a master document for all AVT GigE camera models and is NOT camera specific

EFLensFStopMax – Float – R

Maximum possible F-stop setting or the smallest possible aperture for the EF

lens based on current zoom setting.

EFLensFStopMin – Float – R

Minimum possible F-stop setting or the largest possible aperture for the EF lens

based on current zoom setting.

EFLensFStopStepSize – Integer – R/W

Size of increments/decrements in EFLensFStopCurrent when using EFLensF-

StopIncrease and EFLensFStopDecrease commands, respectively.

EFLensFocus

EFLensFocusCurrent – Integer – R/W

Current focus setting.

EFLensFocusDecrease – Command

Decrease/shorten focus distance by EFLensFocusStepSize.

EFLensFocusIncrease – Command

Increase/lengthen focus distance by EFLensFocusStepSize.

EFLensFocusMax – Integer – R

Maximum/farthest possible focus setting.

EFLensFocusMin – Integer – R

Minimum/nearest possible focus setting.

EFLensFocusStepSize – Integer – R/W

Size of increments/decrements in EFLensFocusCurrent when using EFLensFo-

cusIncrease and EFLensFocusDecrease commands, respectively.

EFLensFocusSwitch – Enum – R

Current position of lens AF/MF switch.

Default: Lens dependent Unit: F-Stop

Range: [1–8] Units: F-Stop/8

Range: [EFLensFocusMin – EFLensFocusMax]

Default: Lens dependent

Range: [1 – Lens dependent] Default: 10

AutoFocus Switch is in auto focus (AF) position

ManualFocus Switch is in manual focus (MF) position

Note



All controls under EFLensFocus become read-only when the

lens AF/MF switch is set to manual focus (MF).