Technical information

AVT GigE camera attributes

AVT GigE Camera and Driver Attributes V1.3.1

This document is a master document for all AVT GigE camera models and is NOT camera specific

EFLensStatus

EFLensID – Integer – R

Identification value of the attached EF lens.

EFLensLastError – Enum – R

Most recently detected error.

EFLensState – Enum – R

Current EF lens state.

EFLensInitialize – Command

Initializes the EF lens. This command is automatically executed on power up

and/or when lens is attached to camera.

EFLensZoom

EFLensZoomCurrent – Integer – R

Current focal length of the EF lens.

EFLensZoomMax – Integer – R

Maximum focal length of the EF lens.

EFLensZoomMin – Integer – R

Minimum focal length of the EF lens.

EFLensErrNone No error detected

EFLensErrQuery Lens failed query by camera

EFLensErrInternal1 Lens communication error (can occur when removing

lens)

EFLensErrInternal2 Lens communication error (can occur when removing

lens)

EFLensErrBusy Lens remained busy for longer than 10 seconds

EFLensErrZeroStop Lens focus “Zero Stop” not detected

EFLensErrInfinityStop Lens focus “Infinity Stop” not detected

EFLensIdle No lens action in progress

EFLensBusy Lens is busy (changing focus or aperture)

EFLensWaiting Camera is waiting for lens attachment

EFLensInitializing Camera is initializing lens

EFLensError Lens Error detected. Error type is indicated by

EFLensLastError. Remains in this state until

EFLensInitialize is executed

Range: [EFLensZoomMin – EFLensZoomMax]

Units: mm

Default: Lens dependent Units: mm