Technical information

AVT GigE camera attributes

AVT GigE Camera and Driver Attributes V1.3.1

This document is a master document for all AVT GigE camera models and is NOT camera specific

LensDrive

Open loop DC 3 axis lens control.

LensDriveCommand – Enum – R/W

Setting to any non-Stop value will execute the function for LensDriveDuration

and then return to Stop.

LensDriveDuration – Uint32 – R/W

Duration of LensDriveCommand to lens.

LensVoltage – Uint32 – R

Reports the lens power supply voltage.

LensVoltageControl – Uint32 – R/W

Lens power supply voltage control. If a bad value is written this control resets

to 0. This is done to prevent users inadvertently setting an inappropriate volt-

age, possibly damaging the lens. See lens documentation for appropriate volt-

age level.

IOD [Default] Enables IOD mode (image on demand mode). In

this mode the camera needs an external trigger signal or

a timer driven internal exposure signal

SyncIn1/2/3/4/5 The camera is switched between IOD and Continuous

mode, dependent on the level of SyncIn1/2/3/4/5

Note



If Continuous mode is activated, no external exposure

signal is allowed. Set e.g. FrameStartTriggerMode to

an unused SyncIn.

Stop No action

IrisTimedOpen Open lens iris

IrisTimedClose Close lens iris

FocusTimedNear Shorten working distance

FocusTimedFar Lengthen working distance

ZoomTimedIn Zoom in

ZoomTimedOut Zoom out

Range: [0 – 5000] Units: μs

Range: [0 – 12000] Units: mV

Range: [0 – 1200012000] Units: mV * 100001; e.g., 8 V = 800008000