Technical information

AVT GigE camera attributes

AVT GigE Camera and Driver Attributes V1.3.1

This document is a master document for all AVT GigE camera models and is NOT camera specific

WhitebalValueBlue – Uint32 – R/W

Gain applied to all blue pixels on the CCD, pre-interpolation. 100% = no gain

applied. Each camera model calibrated with a different factory default.

DeviceStatus

DeviceTemperatureMainboard – Float32 – R

Camera internal temperature measured at the internal control board.

DeviceTemperatureSensor – Float32 – R

Camera internal temperature measured at the sensor.

EventControl

Event controls allow the enabling of various camera events to be transmitted to

the host computer, triggering a registered event callback function.

EventID

Range: [Camera dependent] Units: percent

Note



There is no WhitebalValueGreen, as this is the luminance/

reference channel. To increase/decrease green, decrease/

increase red and blue accordingly.

Units: Degree Celsius Resolution: 0.031 Accuracy: ±1 °C

www



See PvCameraEventCallbackRegister in AVT PvAPI Manual:

http://www.alliedvision.com/fileadmin/content/documents/

products/software/software/PvAPI/docu/

PvAPI_SDK_Manual.pdf

EventAcquisitionStart – Uint32 – R/C 40000

EventAcquisitionEnd – Uint32 –R/C 40001

EventFrameTrigger – Uint32 – R/C 40002

EventFrameTriggerReady– Uint32 – R/C 40018

EventExposureEnd – Uint32 – R/C 40003

EventAcquisitionRecordTrigger – Uint32 – R/C 40004

EventPtpSyncLost – Uint32 – R/C 40005

EventPtpSyncLocked – Uint32 – R/C 40006

EventSyncIn1Rise – Uint32 – R/C 40010