Technical information

AVT GigE camera attributes

AVT GigE Camera and Driver Attributes V1.3.1

This document is a master document for all AVT GigE camera models and is NOT camera specific

SyncOut2/3/4

Analogous to SyncOut1.

SyncOutGpoLevels – Uint32 – R/W

GPO output levels. A bit field. Bit 0 is sync-out 0, bit 1 is sync-out 1, etc.

Stats

CCDTemperatureOK – Uint32 – R

Momentary temperature status of the CCD sensor. Indicates if CCD sensor has

desired cooling temperature.

StatDriverType – Enum – R

StatFilterVersion – String – R/C

Version of the filter driver.

StatFrameRate – Float32 – R

Frame rate of the camera.

StatFramesCompleted – Uint32 – R

The number of camera images returned to the PvAPI frame queue successfully.

SyncIn4 Active when there is an external trigger at SyncIn4

Strobe1 The output signal is controlled according to

Strobe1 settings

CCDTemperatureOK Only for cameras that support this feature: indi-

cates if camera has reached the desired tempera-

ture value

Note



For detailed information see the camera waveform diagrams

provided in the camera manuals.

0 The CCD sensor is too hot. Acquired image data may have higher noise

than expected or contain erroneous pixels at long exposure times

1 The CCD sensor temperature is in the desired temperature range. Acquired

image data are OK

Standard The default network card driver is being used only

Filter The AVT filter driver is being used in conjunction with the default

network card driver. Using the Filter driver will reduce the load

on the host CPU